Duplex Multimode Patch Cord

Features

Different type of terminations SC to ST, LC to FC, etc.
ANSI/TIA/EIA-568.B.3 compliant
50/125µm, 62.5/125µm Multimode Riser
1.6mm, 2mm, and 3mm Simplex / Duplex
IEEE 802.3u, IEC 60794, TIA/EIA-568.B.3 compliant
Electric interference immune
Fibers offers low insertion loss once joined to connector
Telcordia GR-326 tested
Lab connectorized, each jumpers includes a quality certificate to state measuring standards

SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip)
Maximum Connector Loss: 0.50 dB
Typical Connector Loss: 0.30 dB
Typical Return Loss: -25 dB
Buffer Material: PVC
Buffer OD: 900 µm
Jacket Material: PVC (OFNR riser-rated)
Jacket OD: 2.8 mm
Installation Tensile Load: 100 N (445 lbs)
Long-Term Tensile Load: 50 N (222 lbs)
Maximum Tensile Load: 100 N/cm
Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in)
Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in)
Crush Resistance: 750 N/cm
Impact Resistance: 1,000 cycles
Flex Resistance: 5,000 cycles
Attenuation at 1300 nm: 1.0 dB/km
Attenuation at 850 nm: 3.5 dB/km
Operating Temperature: -20°C to +70°C

o i dm

Starview Tech Support & Customer Service access you to open troubleshooting tickets