Duplex Multimode Patch Cord

Features

  • • Different type of terminations SC to ST, LC to FC, etc.
  • • ANSI/TIA/EIA-568.B.3 compliant
  • • 50/125µm, 62.5/125µm Multimode Riser
  • • 1.6mm, 2mm, and 3mm Simplex / Duplex
  • • IEEE 802.3u, IEC 60794, TIA/EIA-568.B.3 compliant
  • • Electric interference immune
  • • Fibers offers low insertion loss once joined to connector
  • • Telcordia GR-326 tested
  • • Lab connectorized, each jumpers includes a quality certificate to state measuring standards
 

Specifications

  • • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip)
  • • Maximum Connector Loss: 0.50 dB
  • • Typical Connector Loss: 0.30 dB
  • • Typical Return Loss: -25 dB
  • • Buffer Material: PVC
  • • Buffer OD: 900 µm
  • • Jacket Material: PVC (OFNR riser-rated)
  • • Jacket OD: 2.8 mm
  • • Installation Tensile Load: 100 N (445 lbs)
  • • Long-Term Tensile Load: 50 N (222 lbs)
  • • Maximum Tensile Load: 100 N/cm
  • • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in)
  • • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in)
  • • Crush Resistance: 750 N/cm
  • • Impact Resistance: 1,000 cycles
  • • Flex Resistance: 5,000 cycles
  • • Attenuation at 1300 nm: 1.0 dB/km
  • • Attenuation at 850 nm: 3.5 dB/km
  • • Operating Temperature: -20°C to +70°C

Ordering Information

o i dm

Download

Download

Support

Starview Tech Support & Customer Service access you to open troubleshooting tickets, Via any of these 3 method.

CONTACT US: +65 61003375

EMAIL:sup

CUSTOMER PORTAL

 

How to choose optical fiber patch cord?

 

The Optial Fiber Patch Cord is available for any kind of configurations you need.

ordering

Take me to choose a connector!

Transceiver-Overview!