Connector ST

Optical fiber connectors are used to join optical fibers where a connect/disconnect capability is required.

Features

  • • ST Simplex or Duplex.
  • • ANSI, IEC, TIA/EIA, NTT and JIS standard compatible.
  • • Precision mechanical dimensions.
  • • Zirconia ferrule PC or 8 degree APC diameter 125~128 μm high concentricity.
  • • Single mode, Multimode and Angle PC.
  • • Multi-piece type or one-piece type is available.
  • • All parts compliant with ROHS.

 

Applications

  • • Telecommunication
  • • CATV
  • • LAN & WAN
  • • Network
  • • Broadband
  • • FTTH

 

Specifications

 

  • • Insertion Loss: ≤0.3dB
  • • Durability (1000 Mating):0.2dB Max.
  • • Operating Temperature:-25°C~+75°C
  • • Storage Temperature:-40°C~+85°C

Remark: Ferrule Concentricity SM< 1um; MM< 1.4um
Ferrule inner diameter tolerance +1/-0um
Ferrule outer diameter tolerance +/-0.5 um

 

 

Ordering Information

 

Support

Starview Tech Support & Customer Service access you to open troubleshooting tickets

Transceiver Selection

Basic key considerations when selecting a Transceiver are as followings:

  • • Protocol/data rate of application
  • • Transceiver Form Factor: SFP, SFP+,XFP, GBIC, CFP and etc.
  • • Optical transmission distance/ Optical budget required for the link
  • • Type of fiber used:
  • • Singlemode /Multimode
  • • Dual Fiber/Single Fiber
  • • Optical transmitting wavelength (mainly for C/DWDM)
  • • Operating environment and condition (normal temp or high temp)
  • • Type and model no of equipment to be used (for coding purpose)

Note: All Starview Transceiver Modules are shipped with DDM features

Technical Support


+65 6100 DESK (+65 6100 3375)
Customer Portal
Facebook
LinkedIn

Location


Singapore Headquarters
60 Kaki Bukit Place #05-19 Eunos Techpark
Singapore 415979

Tel: +65 3157 5338
Fax: +65 3112 8181

© 2018 Starview International. All Rights Reserved.